Instruction manual

Page 8 Installation Instructions: Roadrunner 030/040 Eagle Upgrade
PDI-03500-00, Rev. B01
Installing Your I/O Boards
The Eagle computer may include different types of serial I/O boards, depending on the particular model.
Consult the appropriate installation instructions for the serial I/O board.
Installing Your Roadrunner Board
In some Eagle computers, the Roadrunner board is mounted vertically on a special bracket as shown in
the next two illustrations. Other Eagle computers have their Roadrunner boards mounted horizontally on
the chassis bottom, as shown in the third illustration. The screen on the bottom of the chassis has four
threaded standoffs to the hold the Roadrunner board in place. The instructions in the illustrations show
how the Roadrunner board is held in place:
DWF-20754-00
or
DWF-20754-01
Your Roadrunner 030 or 040 board is mounted
on the DWF-20754-00 bracket shown above.
To access the board, remove these four
Phillips-head screws. You can then fold down
the mounting bracket and board assembly
onto your work surface.
Roadrunner Mounting Bracket (Early Models)