Instruction manual

Page 8 Chapter Three
Eagle 250 Upgrade Instructions, Rev. A00
Memory Module Size
Combinations:
Total
Memory
Bank0
Settings
Bank1
Settings
124124
4MB 4MB
XXXOOO
2 x 4MB 8MB
XXXXXX
8 MB 8 MB
OXXOOO
8MB + 4MB 12MB
OXXXXX
2 x 8MB 16MB
OXXOXX
16MB 16MB
XOXOOO
16MB + 4MB 20MB
XOXXXX
16MB + 8MB 24MB
XOXOXX
2 x 16MB 32MB
XOXXOX
32MB 32MB
OOXOOO
32MB + 4MB 36MB
OOXXXX
32MB + 8MB 40MB
OOXOXX
32MB + 16MB 48MB
OOXXOX
2 x 32MB 64MB
OOXOOX
64MB 64MB
XXOOOO
64MB + 4MB 68MB
XXOXXX
64MB + 8MB 72MB
XXOOXX
64MB + 16MB 80MB
XXOXOX
64MB + 32MB 96MB
XXOOOX
2 x 64MB 128MB
XXOXXO
128MB 128MB
OXOOOO
128MB + 4MB 132MB
OXOXXX
128MB + 8MB 136MB
OXOOXX
128MB + 16MB 144MB
OXOXOX
128MB + 32MB 160MB
OXOOOX
128MB + 64MB 192MB
OXOXXO
2 x 128MB 256MB
OXOOXO
Table 3-1: AM-138-10 Memory Module Jumper (JP7) Settings
Changing Memory SIMMs
To remove a SIMM from its connector:
1. Power down the computer. Remove the chassis cover and access the AM-138-10 board.
2. Press out on the metal retainer clips and gently tilt the top of the SIMM module, so it is free of
the metal retainer clips.
3. Lift the SIMM out of the connector