Specifications
Page A-2 Appendix A
SCSI
SCSI
(PRA-00222-00)
EXTERNAL SCSI BUS
TERMINATOR
CONFIGURATION B
CONFIGURATION A
BAIL LOCKS
MAC821
#4 SCREW
AND WASHER
External Terminator Installation
The illustration shows two different types of external SCSI connectors.
1.Configuration"A" shows an extended external SCSI connector and bail locks for
holding the terminator in place. This configuration is used on several different
models of computers sold by Alpha Micro, including AM-990 and AM-1600
computers. The terminator is installed by plugging it onto the connector, and then
latching the bail locks into the side notches of the terminator.
2.Configuration"B" shows a flush mounted external SCSI connector. This is the
configuration used on pedestal style computers. In this configuration, the
terminator inserts into a cutout in the sheet metal and onto the SCSI connector.
The terminator is held in place with two #4screws and washers.
PDI-00172-60, Rev. A02