Specifications

Page 5-5Installation Instructions: Roadrunner 040 EAGLE 100/AM-3000M/VME Upgrade
Table 1. Front Panel Status Codes Generated by the Monitor
CODE MEANING
4 System is out of QUEUE blocks.
8 A/C power dropped below an acceptable level.
9 Memory parity error.
10 An interface driver (.IDV) defined in a TRMDEF statement in the
system initialization command file was not found in account [1,6]
on the boot device.
11 A terminal driver (.TDV) defined in a TRMDEF statement in the
system initialization command file was not found in account [1,6]
on the boot device.
12 System Initialization Command file was not found.
Table 2. Front Panel Status Codes Generated by the Boot PROMS
CODE MEANING
F System is now clearing and sizing memory.
30 Roadrunner has determined the system type and CPU board it’s
installed in.
30 The system is beginning to execute the boot PROM. An error at
this point indicates your computer has a faulty PROM. Contact
your dealer.
31 The system is transferring the instructions from the PROM into its
Random Access Memory (RAM). If an error occurs here, your
computer might have a bad PROM or bad memory.
PDI-00172-60, Rev. A02