Specifications

Page 2-4 Eagle 100 Hardware Installation

BATTERY

J5J4

ALPHA MICROSYSTEMS

J8 J9

W10

J11

J10

POWER

RUN

DISK

W12

SSD

AM-137

ALPHA

MICROSYSTEMS

AM-987

JP1

U14

U14A

J900

U28 U29

U14

U15

MC1240

AM-987 positioned on

the AM-137 board

AM-987 Installed on AM-137 CPU Board

4.Refer to the following two illustrations and secure the AM-987 board to the

AM-137 CPU board as follows:

A.Remove the nine phillips-head screws holding the side mounting

plate in place.

B.Remove the mounting plate by tilting it back and lifting it up and out

of the chassis bottom channel.

C.From the solder side of the AM-137 board, install two plastic screws

through the mounting holes near the bottom left edge of the board,

and into the plastic standoffs previously attached to the AM-987.

D.After the AM-987 is secured, reinstall the side mounting plate.

PDI-00172-60, Rev. A02