User guide

1 Introduction
This User Guide provides a familiarisation tool to allow you to get your NetPort connected
and get your RS232 equipment on the network as quickly as possible. It will take you step
by step through hardware setup and configuration and help you verify that everything is
working.
What this document will help you achieve:
1) Familiarise you with NetPort & the contents of the kits.
2) Connect NetPort to the LAN.
3) Install Device Installer from the CDROM and use it to detect your NetPort.
4) Assign an IP address to your NetPort so you can consistently reach it.
5) Change the serial settings in NetPort to match those of your serial
equipment.
6) Make a successful connection and transfer data!
If you require more information than this User Guide covers, here are some options:
Data: www.alphamicro.net/netport
Technical info & FAQ’s: www.alphamicro.net/netport/FAQ ** CONSTANTLY UPDATED **
Technical assistance: [e-mail]
Note: This document covers NetPort device server versions AMC232LAN01 &
AMC232LAN01-DVK but the same knowledge can be applied to all the AMC232LAN01-06
products.