User guide

Default Serial Port Settings are:
6.3.1 Baudrate
The unit and attached serial device, such as a modem, must agree on a speed or baud rate to
use for the serial connection. Valid baud rates are 300, 600, 1200, 2400,
4800, 9600 (default), 19200, 38400, 57600, 115200, and 230400 bits per second. In standard
Clock Mode. The unit also supports high-performance baud rates of 460800, and 921600 bits
per second (see Expert Settings to configure High Performance Mode to attain these speeds).
I/F (Interface) Mode
The Interface (I/F) Mode is a bit-coded byte entered in hexadecimal notation.
Interface Mode Options
(1) 2 stop bits are implemented by the software. This might influence performance.
The following table demonstrates how to build some common Interface Mode settings:
Common Interface Mode Settings
Flow
Flow control sets the local handshaking method for stopping serial input/output. Use the
following table to select flow control options: