Owner`s manual

Page 3Eagle/Roadrunner Configuration Information
:T
; System Type/Users: Eagle 040/1
; System Drive Type: 540MB SCSI
; Drive Control/Dvr: RR SCSI/SCZRR.DVR
; AMOS Monitor Type: AMOS32 2.2C PR8/95 (PIC)
;
JOBS 5
;
JOBALC JOB1 ;JOB2
;JOBALC SPOOLA,SPOOLB,SPOOLC,SPOOLD ; per parallel ports
;
QUEUE 2000
;
LOAD LOAD.LIT
LOAD DEL.LIT
LOAD SYSMSG.USA
LOAD TRMDEF.LIT
;
TRMDEF TRM1,AM318=0:19200,ALPHA,350,350,350,EDITOR=15
;TRMDEF TRM2,AM318=1:19200,ALPHA,100,100,100,EDITOR=15
;
DEL TRMDEF
;
VER
PARITY
;
SCZDSP SIMRR.SYS
;SCZDSP SCZRR.SYS
;
LOAD DEVTBL.LIT
DEVTBL DSK1,DSK2,DSK3,DSK4,DSK5
DEVTBL TRM,RES,MEM
DEVTBL /STR0 ; streaming tape drive
;DEVTBL FLP0 ; 3-1/2" floppy drive
;DEVTBL MIN0 ; 5-1/4" floppy drive
;DEVTBL /EGP0 ; parallel port - Eagle 100/200
;DEVTBL /EPP0,EPP1 ; parallel ports - Eagle 300-500
;DEVTBL /SEP0,SEP1,SEP2,SEP3 ; parallel ports - Super Eagle (550)
;
DEL DEVTBL
;
LOAD BITMAP.LIT
BITMAP DSK ; paged bitmap
;BITMAP FLP,180,0
;BITMAP MIN,100,0
;
DEL BITMAP
;
MSGINI 20K
ERSATZ ERSATZ.NEW
Increased QUEUE block allocation
Simple dispatcher, for temporary use only!
High-Performance dispatcher, requires PIC!
MC1129
Roadrunner based computers (like your Eagle) require a high number of queue blocks. The example above shows the
QUEUE block statement set to 2000, which should be sufficient for most Eagle configurations.
Definition statements for both the simple and high performance dispatchers are included in the AMOS32.INI file. Once you
have entered the PIC for the high performance dispatcher (SCZRR.SYS), you will want to change your SCSI dispatcher
statements from this:
SCZDSP SIMRR.SYS to this: ;SCZDSP SIMRR.SYS
;SCZDSP SCZRR.SYS SCZDSP SCZRR.SYS
SCSI Dispatcher
Queue Block Allocation
AMOS32.INI File
PDI-03500-50, Rev. B00