Specifications

Page 28 Installation Instructions: Roadrunner 030 and 040 AM-2000M Upgrade
JP1
JP1
BATTERY
U128
040
DWB-00174-00 REV. XXX
JP4
JP3
JP1
JP2
J2
J3
PIN-1
PIN-1
BATTERY
U128
040
DWB-00174-00 REV. XXX
JP4
JP3
JP1
JP2
J2
J3
PIN-1
PIN-1
CONNECTS
TO J3
CONNECTS
TO P2
CONNECTS
TO J2
CONNECTS
TO P1
P2 P1
P2 P1
J3 J2
J3 J2
Each connector on the
34-pin cables has a
small embossed arrow,
which indicates pin-1.
There are two 34-pin cables in your product
installation kit that create a data path
between the AM-174 and AM-986 boards.
One cable connects between the AM-174's
J3 connector and the AM-986's P2
connector. The other cable connects
between the AM-174's J2 connector and
the AM-986's P1 connector. The connectors
on both cables have a small embossed
arrow that must align with pin-1 on the
connectors they are plugged into.
Step #1
The cable that connects between J3 on the
AM-174 board and P2 on the AM-986 must
be installed first. Fold and install the cable
as shown in the illustration. Make sure all
cable connections are made pin-1 to pin-1.
Step #2
The second cable is installed on top of the
first cable. This cable attaches between J2
on the AM-174 board and P1 on the AM-
986 board. Fold and install the cable as
shown in the illustration. Make sure all cable
connections are made pin-1 to pin-1.
INSTALLING THE SECOND 34-PIN CABLE
INSTALLING THE FIRST 34-PIN CABLE
MC1104
AM-986 to AM-174 Cable Routing
PDI-00172-40, Rev. A05