Specifications

Page 19Installation Instructions: Roadrunner 030 and 040 AM-2000M Upgrade
9.A 121-pin socket was installed on the bottom of the AM-986 board prior to
shipment. This socket gives the AM-986 board added height so that it does not
come in contact with other components on the AM-145 board. During shipment,
the pins on the socket are protected with a piece of conductive foam. Before you
install the AM-985, remove the foam and make sure no foam residue remains
stuck to any of the pins.
10.At this point, your AM-986 board should be ready to install. The AM-986 board
sets on top of the AM-145 board, plugging into the CPU socket at location U127.
There is a cutout on the AM-986 board that makes it easy to align the board with
the CPU socket on the AM-145 board. Place the AM-986 board into position as
shown, using the cutout to align the pins with the socket. If everything is lined-up
just right, you will feel the board settle into position in the socket. This is another
operation where it is best to take your time and be sure the AM-986 and AM-145
CPU socket are properly aligned. When you’re sure the AM-986 board is in
position, gently press the AM-986 board into the socket.
PDI-00172-40, Rev. A05