Service manual

Page 14 AM-6060 Service Manual
Rev. A00
Memory Module Size
Combinations:
Total
Memory
Bank0
Settings
Bank1
Settings
Position: Position:
321321
2 x 4MB 8MB
XXXOOO
4 x 4MB 16MB
XXXXXX
2 x 8 MB 16 MB
XXOOOO
2 x 8MB + 2 x 4MB 24MB
XXOXXX
4 x 8MB 32MB
XXOXXO
2 x 16MB 32MB
XOXOOO
2 x 16MB + 2 x 4MB 40MB
XOXXXX
2 x 16MB + 2 x 8MB 48MB
XOXXXO
4 x 16MB 64MB
XOXXOX
2 x 32MB 64MB
XOOOOO
2 x 32MB + 2 x 4MB 72MB
XOOXXX
2 x 32MB + 2 x 8MB 80MB
XOOXXO
2 x 32MB + 2 x 16MB 96MB
XOOXOX
4 x 32MB 128MB
XOOXOO
2 x 64MB 128MB
OXXOOO
2 x 64MB + 2 x 4MB 136MB
OXXXXX
2 x 64MB + 2 x 8MB 144MB
OXXXXO
2 x 64MB + 2 x 16MB 160MB
OXXXOX
2 x 64MB + 2 x 32MB 192MB
OXXXOO
4 x 64MB 256MB
OXXOXX
2 x 128MB 256MB
OXOOOO
2 x 128MB + 2 x 32MB 320MB
OXOXOO
2 x 128MB + 2 x 64MB 384MB
OXOOXX
4 x 128MB 512MB
OXOOXO
Key to settings: X = Installed, O = Open
Table 2: AM-176 Memory Module Jumper (JP4) Settings
PERIPHERAL MOUNTING
Your AM-6060 computer can hold six half-height peripherals, in three 3.5” and three 5.25” mounting
bays. One of the 3.5” bays and all of the 5.25” bays are accessible through the computer’s front panel
after you remove the appropriate filler panels.
3.5" hard disk drives can be mounted in the 5.25" bays using special mounting brackets.
The following figure shows all six peripheral mounting positions.