Owner`s manual

AM-6060 Computer Owner's Manual, Rev. 00
Chapter 2 - Installation
This chapter gives general installation information for your computer. It discusses the following topics:
•
Unpacking the computer
•
Instructions for re-shipping the computer
•
Recording the SSD identification number
•
Preparing the site for your computer
•
Verifying AC power requirements
•
Turning on the computer
•
Installing the operator terminal
•
Initially testing the computer
•
Booting under AMOS
•
Testing the network setup
•
Turning off the computer
•
Expanding your computer
•
How to get help if you need it
UNPACKING GUIDELINES
Unpack the computer and
save all packing material and cartons
in case you ever need to transport the
computer. The shipping material was carefully designed to provide optimum cushioning and protection.
When re-shipping or otherwise transporting your computer, you must use the original packaging to
ensure safe shipment.
When moving your computer, handle it gently. The hard disk in the main unit has moving parts and
delicate read/write heads. Rough handling could damage the drive and prevent your system from
operating properly.
Unpack the terminal which will serve as the operator terminal and set it aside for now.
What You Will Need
When you unpack your computer you should find the following items:
•
Documentation, including this manual, and warranty cards
•
The main enclosure
•
One AC power cord