Specifications
9
We reserve the right to modify technical specifications without prior notice.
UK830301/170306 © Alpha-InnoTec GmbH
Scope of delivery
Example of scope of delivery:
1 Compact unit with integrated
hot water tank, electric heating
element, integrated circulating
pump heating circuit and sensors
2 Screen
3 Vibration decouplers for
heat source connection
4 Control element of the heating
and heat pump regulator
5 Safety component for heating circuit
6 Package with 4 feet, 1 outdoor
sensor, 1 insulating set, 2 ball valves
(model with designator K: 1 ball
valve), 8 seals, 1 service hose, 1 cap
valve, 1 mount for expansion vessel
of heating circuit, (model with
cooling function: room thermostat)
7 Expansion vessel of heating circuit, 25 l
8 Expansion vessel of heat source, 12 l
9 Connection assembly for heat source
10 Module box with integrated
circulating pump of heat source
Proceed as follows:
Inspect delivery for outwardly visible signs of
damage.
Check to make sure that delivery is complete.
Any defects or incorrect deliveries must be claimed
immediately.
NOTICE.
Note the model.
Overview “Technical data/scope of delivery” or
rating plate on unit.
Installation and assembly
Observe the following when performing all work:
NOTICE.
Always comply with applicable accident pre-
vention regulations, statutory regulations,
ordinances and directives.
WARNING!
The heat pump or heat pump system may
be installed and assembled only by a qualied
technician!
NOTICE.
Observe the sound levels of the respective
model.
Overview “Technical data/scope of delivery”,
“Sound” section.
installation area
CAUTION.
Install the unit only indoors.
The installation area must be frost-free and dry. It must meet
the requirements of DIN EN 378. It must also fulfill applica-
ble local regulations.