Specifications

We reserve the right to modify technical speciﬁcations without prior notice.

UK830301/170306 © Alpha-InnoTec GmbH

1 Connection for control unit

2 Connection for output

compressor 3PE

3 Connection for additional

heating 3NPE

4 N/PE

5 Only for units with cooling function:

3 additional terminals for room

thermostat and dew point sensor

6 Contactor for heating element

NOTICE.

Electric heating element is connected for

6 kW at factory. It can be connected for 2 or

4 kW on the contactor.

For further information, see the adhesive label on

the electric heating element.

1 Adhesive label on electric

heating element

After completion of all electrical installation work,

close the switch cabinet inside the unit.

Close the front panel of the unit if no further instal-

lation work inside the unit is to be performed im-

mediately.