Specifications

15
We reserve the right to modify technical specifications without prior notice.
UK830301/170306 © Alpha-InnoTec GmbH
connecting the module box to the heat source
Vibration decouplers are included for the connection to the
pipes of the heat source. They must be installed in order to
prevent damage from vibrations to the pipes. The pipes of
the heat source can be connected either on the right or left
side of the unit.
1 Connection on left side of unit
2 Connection on right side of unit
Proceed as follows:
Cut out round plates on the desired connection
side.
Make sure that no metal burrs remain. Cut foam
with a knife.
Insert included plastic rosettes in the holes.
Insert vibration decouplers in unit from outside and
guide them inside the unit to the connections on
the module box.