Specifications

11
We reserve the right to modify technical specifications without prior notice.
UK830301/170306 © Alpha-InnoTec GmbH
1 Recessed grips
2 Carrying strap
CAUTION.
Never use components and hydraulic con-
nections on the unit for purposes of trans-
port.
installation
DANGER!
Several people are required to install the
unit. Do not underestimate the weight of the
unit.
NOTICE.
The heat source can be connected either on
the left or right side of the unit. Maintain the
required clearance between the connection
side and the wall.
“Installation of the hydraulic connections”, “Connec-
tion of module box to the heat source” section.
Always comply with required clearance dimensions.
“Dimensional drawings” and “Clearance dimensi-
ons” overviews.
Proceed as follows at the installation location:
Set unit on a solid and level, preferably sound-insu-
lated surface.
Mount feet.
CAUTION.
Moving the unit without the feet mounted
can damage the oor.
Mount the feet before installing the module
box in the unit.
Proceed as follows to mount the feet on the unit:
•
Tip the unit slowly and carefully to one side.
Secure unit in raised position so that it cannot acci-
dentally tip back into the original position.
CAUTION!
Hands and ngers could be crushed during
the following tasks!
•
Mount one foot each on the front and back of the
unit.
1 Foot
2 Lock nut
3 Adjusting screw
•
Slowly and carefully tip the unit back into the origi-
nal position.
•
Repeat procedure on the other side of the unit.
Place unit at final installation location. Compen-
sate for minor unevenness using the four adjusting
screws. Then tighten the lock nuts.