Specifications

10
We reserve the right to modify technical specifications without prior notice.
UK830301/170306 © Alpha-InnoTec GmbH
CAUTION.
Do not tilt the module box more than a ma-
ximum of 45° (in any direction).
CAUTION.
Never use components, pipes of the coo-
ling circuit or hydraulic connections on the
module box for transport purposes.
CAUTION.
Do not damage the hydraulic connections under
any circumstances.
Dispose of angle bracket, transport and packaging material
properly and in accordance with ecological principles.
We recommend removing the front panel to reduce
the weight of the unit for further transport.
Loosen quick-release screws for the front panel.
Turn counter-clockwise 90°.
Lift front panel and set aside in a safe place.
Transport unit to installation location using a hand
truck or have two persons carry it.
DANGER!
Make sure to secure unit on the hand truck
against slipping during transport.
CAUTION.
Do not damage the hydraulic connections
under any circumstances.
– Push hand truck only beneath back of
unit for transport.
NOTICE:
Without the module box, the unit can be
transported horizontally.
transport to installation location
To avoid damage during transport, you should transport the
unit to the final installation location (secured on a wooden
pallet) using a lifting truck.
If it is not possible to transport the unit to the final installa-
tion location using a lifting truck, you can also transport the
unit using a hand truck.
DANGER!
Several people are required to transport the
unit. Do not underestimate the weight of the
units.
Overview “Technical data/scope of delivery”, “Ge-
neral unit data” section.
CAUTION!
Wear safety gloves.
DANGER!
Unit is not fastened to the wooden pallet.
The unit can tip when being lifted down and
during transport with a hand truck. This can
result in personal injury and damage to the
unit.
– Take suitable precautionary measures
to eliminate the danger of tipping.
Proceed as follows if transport with a lifting truck is not
possible:
Remove packaging and transport material. Remove
extra box and module box from the wooden pallet
and bring to installation location.
Use straps to lift and carry the module box.