Specifications

9
We reserve the right to modify technical specifications without prior notice.
83053100bUK © Alpha-InnoTec GmbH
Scope of delivery
Example of scope of delivery:
1 Compact unit with integrated
hot water tank, electric heating
element, integrated circulating
pump heating circuit and sensors
2 Screen
3 Vibration decouplers for heat
source connection
4 Control element of the heating
and heat pump regulator
5 Safety component for heating circuit
6 Package with 4 feet, 1 outdoor sensor,
1 insulating set, 2 ball valves (model
with designator K: 1 ball valve), 8 seals,
1 service hose, 1 cap valve, 1 mount for
expansion vessel of heating circuit, (model
with cooling function: room thermostat)
7 Expansion vessel of heating circuit, 25 l
8 Expansion vessel of heat source, 12 l
9 Connection assembly for heat source
10 Module box with integrated
circulating pump of heat source
Proceed as follows:
Inspect delivery for outwardly visible signs of dam-
age…
Check to make sure that delivery is complete.
Any defects or incorrect deliveries must be claimed
immediately.
NOTICE.
Note the model.
Overview “Technical data/scope of delivery” or
rating plate on unit.
Installation and assembly
Observe the following when performing all work:
NOTICE.
Always comply with applicable accident pre-
vention regulations, statutory regulations, ordi-
nances and directives.
WARNING!
The heat pump or heat pump system may
be installed and assembled only by a quali-
ed technician!
NOTICE.
Observe the sound levels of the respective
model.
Overview “Technical data/scope of delivery”,
“Sound” section.
installation area
ATTE NTION
Install the unit only indoors.
The installation area must be frost-free and dry. It must
meet the requirements of DIN EN 378. It must also ful-
ll applicable local regulations.