Specifications
17
We reserve the right to modify technical specifications without prior notice.
83053100bUK © Alpha-InnoTec GmbH
Electrical connections
Observe the following when performing all work:
DANGER!
Danger of fatal injury due to electric
current!
Electrical connections may be installed
only by qualied electricians.
Before opening the unit, disconnect the
system from the power supply and secure
it from being switched back on!
DANGER!
Observe the relevant EN, VDE and/or ap-
plicable local safety regulations during the
installation and during all electrical work.
Comply with technical connection re-
quirements of the responsible power sup-
ply company (if required by the latter)!
NOTICE.
All live wires must be stripped before they are
installed in the cable duct of the switch cabinets!
Remove front panel of unit, if necessary…
Transport to installation location, .
1 Ducts for electric/sensor cables
with strain relief screws
2 Electrical switch cabinet
3 Intermediate oor of unit
opening the angle ball valves on the module
box
Open all angle ball valves on the module box by turning
them 90° counter-clockwise.
safety component
The safety component for the heating circuit is in the ex-
tra box.
Proceed as follows:
Mount the safety component on the connection
provided on the top of the unit.…
The safety drain of the safety valve must lead into
the drain via a funnel siphon in accordance with the
applicable standards and regulations.
expansion vessels
The expansion vessel of the heat source is included in
delivery and must be installed with the connection as-
sembly.
The expansion vessel for the heating circuit, the corre-
sponding cap valve and the wall mount are included in
the scope of delivery. They must be integrated in the
heating circuit on-site in compliance with the applicable
standards and directives.
We recommend installing a suitable expansion vessel
(not included in delivery) in the hot water circuit. This
equalizes pressure uctuations or water shocks in the
cold water network and prevents unnecessary loss of
water.