Specifications

14
We reserve the right to modify technical specifications without prior notice.
83053100bUK © Alpha-InnoTec GmbH
Cut out round plates on the desired connection
side…
Make sure that no metal burrs remain. Cut foam
with a knife…
Insert included plastic rosettes in the holes…
Insert vibration decouplers in unit from outside and
guide them inside the unit to the connections on
the module box.
Heating circuit inow (return ow) connection
for models without cooling function.
Heating circuit inow (return ow) connection
for models with cooling function.
NOTICE.
Always note which is the inow (return ow)
and outow (forward ow) of the heating cir-
cuit. They are marked with colors, as are the vi-
bration decouplers:
red = hot water outow (forward ow)
blue = hot water inow (return ow)
connecting the module box to the heat source
Vibration decouplers are included for the connection to
the pipes of the heat source. They must be installed in
order to prevent damage from vibrations to the pipes.
The pipes of the heat source can be connected either on
the right or left side of the unit.
1 Connection on left side of unit
2 Connection on right side of unit