Specifications

11
We reserve the right to modify technical specifications without prior notice.
83053100bUK © Alpha-InnoTec GmbH
NOTICE:
Without the module box, the unit can be trans-
ported horizontally.
1 Recessed grips
2 Carrying strap
CAUTION.
Never use components and hydraulic con-
nections on the unit for purposes of trans-
port.
installation
DANGER!
Several people are required to install the
unit. Do not underestimate the weight of
the unit.
NOTICE.
The heat source can be connected either on the
left or right side of the unit. Maintain the re-
quired clearance between the connection side
and the wall.
“Installation of the hydraulic connections”, “Con-
nection of module box to the heat source” section.
ATTE NTION
Always comply with required clearance dimen-
sions.
“Dimensional drawings” and “Clearance dimen-
sions” overviews.
Proceed as follows at the installation location:
ATTE NTION
Set unit on a solid and level, preferably sound-in-
sulated surface.
Mount feet…
ATTE NTION
Moving the unit without the feet mounted can
damage the oor.
Mount the feet before installing the module box
in the unit.
Proceed as follows to mount the feet on the unit:
•
Tip the unit slowly and carefully to one side…
Secure unit in raised position so that it cannot acci-
dentally tip back into the original position…
CAUTION!
Hands and ngers could be crushed during the
following tasks!
•
Mount one foot each on the front and back of the
unit…
1 Foot
2 Lock nut
3 Adjusting screw
•
Slowly and carefully tip the unit back into the origi-
nal position…
•
Repeat procedure on the other side of the unit…
Place unit at nal installation location. Compen-
sate for minor unevenness using the four adjusting
screws. Then tighten the lock nuts.