Specifications

10
We reserve the right to modify technical specifications without prior notice.
83053100bUK © Alpha-InnoTec GmbH
ATTE NTION
Never use components, pipes of the cooling cir-
cuit or hydraulic connections on the module box
for transport purposes.
ATTE NTION
Do not damage the hydraulic connections under
any circumstances.
Dispose of angle bracket, transport and packaging
material properly and in accordance with ecological
principles.
We recommend removing the front panel to reduce
the weight of the unit for further transport…
Loosen quick-release screws for the front panel.
Turn counter-clockwise 90°…
Lift front panel and set aside in a safe place…
DANGER!
The carrying strap attached to the back of
the unit is an aid for tipping the unit onto a
hand truck! Always secure the unit on the
hand truck with a tension belt!
The carrying strap can also be used as a
transport aid so that the unit without the
module box can be carried by two persons
(see illustration)!
Do not lift or transport the unit using only
the strap!
– The strap could break!
– Persons could be injured!
– Persons beneath the load could be fatal-
ly injured!
– The unit and other objects could be
damaged!
Transport unit to installation location using a hand
truck or have two persons carry it…
ATTE NTION
Do not damage the hydraulic connections under
any circumstances.
– Push hand truck only beneath back of unit for
transport.
transport to installation location
To avoid damage during transport, you should transport
the unit to the nal installation location (secured on a
wooden pallet) using a lifting truck.
If it is not possible to transport the unit to the nal in-
stallation location using a lifting truck, you can also
transport the unit using a hand truck.
DANGER!
Several people are required to transport
the unit. Do not underestimate the weight
of the units.
Overview “Technical data/scope of delivery”,
“General unit data” section.
CAUTION!
Wear safety gloves.
DANGER!
Unit is not fastened to the wooden pallet.
The unit can tip when being lifted down
and during transport with a hand truck.
This can result in personal injury and dam-
age to the unit.
– Take suitable precautionary measures
to eliminate the danger of tipping.
Proceed as follows if transport with a lifting truck is not
possible:
Remove packaging and transport material. Remove
extra box and module box from the wooden pallet
and bring to installation location…
Use straps to lift and carry the module box…
ATTE NTION
Do not tilt the module box more than a maxi-
mum of 45° (in any direction).