Specifications

12
We reserve the right to modify technical specifications without prior notice.
UK830300/170717 © Alpha-InnoTec GmbH
The connections for the heating circuit or the heat source
are located on the back of the unit:
1 Hot water outflow (forward flow)
2 Hot water inflow (return flow)
3 Heat source inflow (return flow)
4 Heat source outflow (forward flow)
INSTALLATION ON SIzE 1 UNITS
Proceed as follows:
We recommend installing a contamination filter
(screen size 0.9 mm) on the heat source inflow
(return flow) connection…
Connect the pipes of the heating circuit and the
heat source with the corresponding connections on
the back of the unit. Use vibration decouplers.
These are included in the scope of delivery. They must be
installed in order to prevent damage from vibrations to the
pipes.
Arrange the vibration decouplers in a quarter circle, as
shown in the following drawing:
A straight or extended hose arrangement for the vibration
decoupler is not permitted.