Specifications

8
We reserve the right to modify technical specifications without prior notice.
83051400aUK © Alpha-InnoTec GmbH
Scope of delivery
(twopaCkingunits):
Packing unit 1:
Air ow bafes (quantity of 2,
each in a separate box)
Packing unit 2:
Compact unit with fully hermetically
enclosed compressor, all safety-related
components for monitoring of cooling
circuit and hose for condensate discharge
(connected on heat pump side).
Inspect delivery for outwardly visible signs of damage.
Check to make sure that delivery is complete...
Any defects or incorrect deliveries must be claimed
immediately.
NOTICE.
Note the model.
Overview “Technical data / scope of delivery”.
aCCessoriesneCessaryForoperation
ATTENTION
Use only original accessories from the manufac-
turer of the unit.
The heating and heat pump regulators – functioning as
wall regulators, comfort boards as well as control and
sensor wires – are necessary for operation of the unit
and must be ordered separately.
The heat pump is a functioning unit only with the heating
and heat pump regulator and the control and sensor
wires.
Heating and heat pump regulator
(for wall mounting)
Control and sensor wires are available in various lengths,
as required.
additionalaCCessories
The installation accessories (vibration decouplers)
for air/water indoor installation heat pumps must be
ordered separately.
Dew point monitors must be ordered separately.
With the LW... A/RX you must select the electrical
heating element for the specic system and order it
separately.
Installation and assembly
Observe the following when performing all work:
NOTICE
Always comply with applicable accident pre-
vention regulations, statutory regulations, ordi-
nances and directives.