User's Manual

7
3.17. Downloads
You can check the downloaded or being-downloaded contents.
3.18. Backup and Restore
You can backup the materials and restore them.
3.19. Settings
Your phone can connect to a variety of networks and devices, including Wi-Fi,
Bluetooth devices, such as headsets. You can also transfer files to/from your PC
through the data cable.
Transfer data between Phone and PC
The phone will be connected Storage mode.
Touch the notification, can select to change to other connect mode. The mode has
Media device(MTP), Camera(PTP), Charge only and Built-in CD-ROM.
Use data services on your phone
Ensure that your device has an active data connection. To use the data services
please follow below steps.
Menu> Go to Settings> select SIM card > Tap Cellular data> Select the SIM with
which you want to use data connection.
Note: You now need not to worry about the operator setting of your device. Your
device detects and install the operator settings automatically as soon as you insert
your SIM card.
WARNING: To avoid any over cost contact your operator to know more about
best plans.
Connect to Wi-Fi Networks
To browse the Internet via Wi-Fi:
Go to settings> Wi-Fi > turn it ON, select the WIFI connection listed under Wi-Fi
networks with which you want to connect> Enter the password.
Note: Make sure that Wi-Fi network with which you want to connect is in the range
and is active.
Pair With Bluetooth Devices
Go to Settings > Bluetooth.
If Bluetooth is off, check Bluetooth to turn it on. Your phone scans and displays the
Bluetooth devices in range.
If your phone stops scanning before you make the other device discoverable, touch
Refresh.
Touch the ID of the other device in the list Settings to pair them. If the pairing is
successful, your phone connects to the device.
Connect to Internet on your PC via Phone