User's Manual

To adjust the volume when talking on the phone, press the Vol+ and Vol- to make
volume do up and down. When you reach the max/min volume, you will hear a warning
tone.
Last Number Redial
When listening to music or headset is standing by, double click MFB to redial the last
number. If you are listening to music, it will pause automatically during the call.
Mute
When talking on the phone, press and hold Vol+ or Vol- for 2 seconds to mute your
phone. You will hear the caller, but the caller will not hear you. There will be a warning
tone every 10 seconds, reminding you that you are in mute mode.
Quit Mute
Press and hold Vol+ or Vol- for 2 seconds to exit mute mode.
Switching Between Your Mobile Phone and Headset
When talking on the phone, double-click the MFB to switch the voice from your headset
to your mobile phone. By double-click the MFB again, the voice will switch back to the
headset.
Reconnect
When the headset is disconnected from your mobile phone, you will hear the words
“Your headset is disconnected”. If you press the MFB, it will reconnect. You will hear the
words “Your headset is connected” from the headset.
Ć Some mobile phone may have a prompt screen, that will ask you if you would like to
pair your device.
Voice-Command Dial
If your mobile phone supports this function, press and hold Vol+ or Vol- for 2 seconds to
activate voice command. By re-pressing and re-holding vol+ or vol- for 2 seconds during
the voice dial mode, voice dial will be canceled.
Ć Please refer to the manual of your mobile phone for voice-command dial support.
Connect with 2 mobile phones