User's Manual
Indicator for Charge in working stage: Battery voltage lower than 3.3V˄the stage of
battery lower than 15%˅, there will be a warning tone with LED indicator flashing in
red; battery voltage lower than 3.1V ( the stage of battery lower than 5%), the headset
will power off directly.
Operating Temperature: Charging 0 ~ 40ć, charging than -20 ~ 60ć.
ƵStorage Temperature: -40 ~ 80ć.
Speaker and MIC parameters
Speaker Specifications / mode:9.0mm, Dynamic
Distortion˖Below 1%
Impedance:32¡/typ
Frequency(Hz): 20Hz20KHz
MIC Sensitivity: -42f3dB
Bluetooth Parameters
Bluetooth Version: 4.0
Support Profile: HSP, HFP, A2DP, AVRCP
The Remote Control to Speaker: MFB (Power ON / Power Off / Play / Pause) ;
Vol+/Next song, Vol-/Previous song.
Device Name: Quikcell
Pass: 0000
RF Transmitter: class II (-6dBm ~ +4dBm)
Receive Sensitivity: -90dBm
Transmission Range (Hz): 2.40GHz ~ 2.48GHz
Transmission Distance: 10m
Operating Instructions(The Switching between Spanish and English )
The Switching between Two Kinds of Language˖Double click the MFB button when
the headset is power on and make sure it disconnects with any device. At this time you
will hear the warning tone.
Power On
When the headset is off, press and hold the multi-function Button (MFB) for 3 seconds.
The LED indicator will flash twice in blue. At this time you will hear the words “Power
2.402GHz ~ 2.480GHz