Manualshelf

User Guide

ManualsBrandsALPHA BIDET ManualsBathroom FixturesAlpha ONE V2 Bidet Seat - IMPROVED DESIGN - Elongated - Non-Electric Dual Nozzles - Ultra Low Profile - Powerful Spray - EZ 1 Lever Control - Brass Valve and Fittings - Sturdy Sittable Lid
12345678910
Installation Procedure
First installation method (recommended)
1. Completely remove the old toilet seat & lid
Second installation method
1. Remove the old toilet seat. Put the installation catch plate on
the ceramic toilet bowl.
2. Put the catch plate over the toilet seat mounting holes in the ceramic of the connecting bolts
with adjusting pieces. Screw on the nuts from underneath the toilet. Then tighten to secure the
catch plate. Refer to the first installation step 3.
Old toilet seat
2. Install expansion nuts. Be sure to firmly press
down so the top of the expansion nut is flush
with the ceramic toilet surface.
3.Attach the catch plate
Attach the catch plate in the toilet seat holes. Adjust
the position of mounting bolts and adjusting pieces to
line up the mounting bolts to the expansion nuts.
Then tighten to secure the catch plate.
4.Install the bidet seat
Line up the bidet with the catch plate then push the
bidet seat onto the catch plate. You will hear the
bidet seat click into the place.
Slots under bidet seat
4
catch plate
Refer to first installation method step 1.
A L P H A O N E