User's Manual

3 / 7
you choose to turn on the multi controller function and open the device to any cell phone
number
4.3 Changing the Password:
SMS: *password*654321* (654321 refers to new password)
You will receive the following text: "Notice: The password change is successful for
+1XXXXXXXXXX. The new password is 654321.”
Note: Changing password command has to be sent from master controller number.
5. Motion Detected Alert
the Master Controller will receive an Call/SMS alert once the device detects vibration
indicating possible motion.
5.1 Set vibration sensitivity
There are 5 levels of the motion sensitivity. 1 being the most sensitive, 5 the least, default
setting is 1.
SMS: *sensitive*1-5*
5.2 Set SMS Alert
There will be a SMS alert send to master number when any motion is detected, after 3
minutes of non-movement. The system default setting is alert off, and can be turned
on by command.
SMS: *smsalert*
To enable motion sms alert function.
SMS: *alertoff*
To turn off motion alert function.
6. Tracking via SMS
6.1 SMS: *locateaddress*
Master number will receive the Cell tower address of the device via SMS.
6.2 SMS: *locatemap*
Master number will receive a Google map link. Click the link to view the map via cellphone
browser. Device will reply the map link cell tower location.