Technical data

Installation & Operation Manual GM-TTT
Page 7
A5
A5A5
A5 Safety Instructions
Safety InstructionsSafety Instructions
Safety Instructions
The general safety information in this part is for both operating and service personnel.
Alpermann+Velte products are only to be used as directed. Specific warnings and cautions will
be found throughout the manual where they apply.
Review the following safety instructions to avoid injury and prevent damage to this product or
any products connected to it.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
Safety Terms and Symbols
Terms and Symbols in this manual:
CAUTION: Caution statements identify conditions or practices that could result
in damage to this product or other property.
Terms and Symbols which may be found on the product:
ATTENTION: Refer to the manual.
Observe precautions for handling electrostatic-sensitive devices.
Signal Ground.
Product Damage Precautions
PREVENT OVERHEATING
To prevent product overheating, position the unit only where sufficient air
circulation can be maintained. Good air circulation is essential to prevent
internal heat build-up, do not block any ventilation openings. Do not expose
the unit to direct sun light or any other strong lights. Keep the unit away from
heat sources.
PROVIDE PROPER ENVIRONMENT
Dust, humidity, shocks and strong electromagnetic fields must be avoided. Do
not expose this apparatus to dripping or splashing water. Ensure that no
objects filled with liquid are placed on the apparatus.