Technical data

Installation & Operation Manual GM-TTT
Page 38
3.3.2 U STORE / U LOAD / U RESET
“U” denotes a user area. It is a non-volatile memory, in which a whole set-up of GM-TTT can
be stored separately. See chapter “Factory Settings” for more details.
Press the enter button to execute the selected function:
U STORE This function stores the parameters of the current set-up to the user area, this
includes the parameters of the MTD system transferred from an operational unit -
except the time zone parameters of timers A - F (see chapter “Factory Settings” for
details). During this process STORE is displayed, at the end U STORE will be
displayed again. The storing process has no influence to the running time code
operating mode.
U LOAD This function recalls the set-up of the user area, and it forces a re-start of GM-TTT!
U RESET This function resets the parameters of the user area. During this process STORE is
displayed, at the end U RESET will be displayed again. The storing process has no
influence to the running time code operating mode.
3.3.3 A ... F: Display Timer A ... F
Using the → button you can bring the current values of timer A ... F to the display. This is for
test purposes only. The values may be different from what can be seen at a MTD display.