User Manual

3 User Manual
Functions
Operation
Power ON
Instructions LED Indicator
Blue - Solid
Power OFF OFF
Pairing Automatically enters pairing mode Blue - Flash every
2 seconds
Paired Select “Alpatronix AX500” on your
phone’s list of available bluetooth
devices
Indoor:
Blue Solid
Un-Pair
(disconnect)
Press + and - buttons together Blue - Flash every
2 seconds
- AUX mode Insert AUX jack
- TF mode Insert TF card (automatic)
- TWS
functions
See explanation on page 4 See page 4
Outdoor:
Blue - Slow ash
Press and hold for 2-3 seconds
Press and hold for 2-3 seconds
Indoor:
Green Solid
Outdoor:
Green - Slow ash
Powering ON/OFF
Pairing
Equalizer
(sound eects)
Press (click) the button
Indoor:
Green Solid
Outdoor:
Green - Slow ash
Indoor: Pulsing
Outdoor: Slow ash
Switch modes Press (click) then button
Modes
Operation Instructions LED Indicator
Operation Instructions LED Indicator
Functions - Continued
Operation Instructions LED Indicator
Low battery
alarm
N/A
Low battery
shut down
N/A
Charging RED - Solid
Charging
completed
RED LED OFF
RESET Insert a toothpick in AUX port
Note: The volume and mode have memory function. When you power
the AX500 ON, the speaker will resume the same volume and mode
(indoor/outdoor) settings as before it was turned o.
Insert USB-C to 5V USB charger
(only cable is included)
Battery lower than 6.2V
Battery lower than 6.2V
N/A
LED OFF
Answer N/A
Reject N/A
Hang up N/A
Call back Blue - SolidHold the button.
(when not in call)
Press (click) the button.
(during the call)
Hold the button.
(when receiving call
Press (click) the button.
(when receiving call)
Music Functions
Volume up N/A
Volume down Press (click) the - button N/A
Next song Hold the + button N/A
Previous song Hold the - button N/A
Play/Pause N/APress (click) the button
(mute in AUX mode)
Press (click) the + button
Call Functions
Operation Instructions LED Indicator
Other Functions and Alerts
Operation Instructions LED Indicator