User manual

TIMER SETTING :
- Press MODE button twice. Time flashes on J part of the display. Use + and – buttons to set the
desired time.
- After a while, selected time is fixed on the display. The product will automatically stop when the time
has come to 0.
OSCILLATION :
- Press OSCILLATION button.
flashes on I part of the display. The heater starts oscillating (90° amplitude).
- Press OSCILLATION button again, the heater stops swinging.
AUTOMATIC CUT-OFF :
This appliance is equipped with an automatic cut-off device in case of overheating or fall.
13
notice RC_20EIT:notice RC_20ET 7/04/08 11:49 Page 13