Specifications
• Place the Sentinel HDi120 in unfinished area of the basement near a
drain access (condensate will be drained out via Pump).
• Connecting the Duct Tube on Collar, supply the dry air from the
dehumidifier to a large and open area in finished section of the basement.
• Place a return grill / passive vent on the other side of the wall that
separates the finished and unfinished areas. This will allow circular air flow
go through the basement.
unfinished area dry as well.
• The passive grill will prevent the unfinished room from being placed under
a negative pressure and also allow the dehumidifier to focus on keeping the
• The Remote Control can be used For normal Retome function,to insulate
the Noise of Unit,and Also can be used at the Senser Switch,you can choose
the humidity senser between Unit and remote Control.
• Be sure to keep all doors open in the basement to help with proper air
circulation(Bedrooms,Bathrooms,etc.)
• Place the Sentinel HDi120 in unfinished area of the basement near a
drain access (condensate will be drained out via Pump).
• Connecting the Duct Tube on Collar, supply the dry air from the
dehumidifier to a large and open area in finished section of the basement.
• Place a return grill / passive vent on the other side of the wall that
separates the finished and unfinished areas. This will allow circular air flow
go through the basement.
• Be sure to keep all doors open in the basement to help with proper air
circulation(Bedrooms,Bathrooms,etc.)
• The passive grill will prevent the unfinished room from being placed under
a negative pressure and also allow the dehumidifier to focus on keeping the
unfinished area dry as well.
• The Remote Control can be used For normal Retome function,to insulate
the Noise of Unit,and Also can be used at the Senser Switch,you can choose
the humidity senser between Unit and remote Control.
Sentinel HDi120
Sentinel HDi120
Sentinel HDi120
Sentinel HDi120
HDi120 Sentinel
Dehumidifier
AlorAir Solutions,Inc Web: www.alorair.com E-mail: sales@alorair.com
The Sentinel HDi120 has cETL Approved.
Memory Starting And Turn On/O ffAutomatically: This Crawl Space Dehumidifier Automatically Turns On And O ffDepending On The
Humidity Levels, Comes Back After a Power Failure, No Need To Turn On Manually. Ductable And Remote Controlled, Both Inlet and Outlet
can be Ducted.
SET IT AND FORGET IT control automatically starts dehumidification when humidity above target is sensed.
Designed for the Modern Home-For Your Full Satisfaction, We Designed this Professional Dehumidifier with the Modern Consumer in Mind,
All Special Features Make it the Best for Whole House and Crawl Space or Basement Applications, Remote Control System, Strong as the
Tank, Microchannel Condenser Technology, Merv-1, and Merv-10 Filter, Low-Temperature Operation, Built-in Pump.
As the unique design compared with others, we have the humidity sensor in bypass air design which makes the short-cycling go away and
have quick access to the pump and mainboard. Customers can do it by themselves and service become easy. Preassembly makes the
installation process simple, thereby it reduces the overall installation and project cost.
Add:2048E.FrancisStOntarioCA91761 Tel:888-990-7469