Installation & Assembly

Read this entire manual through to the end before proceeding with the assembly.

AUBURN | BLUESTONE SAUNA INSTALLATION MANUAL

page 1

Thank you for your purchase of your Auburn / Bluestone sauna! Should you have any questions during assembly,

please feel free to call us at 888.355.3050, or email sales@almostheaven.com.

Regular business hours are 9-5 EST, M-F.

Your Auburn / Bluestone Indoor Sauna is specically designed to utilize your existing oor. As such, assembly

is made very simple since the entire sauna sits on pre-fabricated rails and risers. Your sauna can be assembled

on any surface that is rm and at, including concrete, ceramic, vinyl, laminate or tile. Installation on a carpeted

surface is not recommended.

Your Bluestone kit should include the following:

c 4 oor risers

c 4 Wall support rails

c 4 Roof support rails

c 2 Roof panels

c 2 Pieces of roof trim

c Wall panel A

c Wall panel B

c Wall panel C

c Wall panel D

c Wall panel E

c Window panel F

c Door panel G

c Window panel H

c Window panel I

c Upper long bench

c Lower Side Bench

c Long backrest w/LED light

c Short backrest

c LED power supply

c Door handle assembly

c Heater

c Stones

c Wall sensor cover

c Hardware bag containing 2” screws, 2.5” bench screws, and trim nails

c Heater fence kit

These tools are required to assemble yourAuburn / Bluestone sauna:

c Cordless drill

c Tape measure

c Rubber mallet

c Hammer

c 1/2” or 5/8” Forstner bit

c Utility knife

c Screwdriver (phillips and athead)

c Level

c Step stool or ladder