Instructions / Assembly

ROOM ASSEMBLY…CONTINUED
Note: at this point in the installation, you may nd it helpful to tie a loose rope or strap around your sauna. (32)
Continue placing staves, tapping them in place with a rubber mallet (33-34). Do not nail the remaining staves in place.
When you arrive to the point of closing the room, you may nd that the remaining space will not accommodate a full-size stave (35). We have
provided a set of ller staves cut into various widths (36). Choose the necessary combination of ller staves to provide the tightest t. Install
the ller staves by tilting the adjacent staves up, insert and mallet in the ller staves, and push them all back into place (37). It is important
that you use as many staves and llers as you can prior to tightening the stainless-steel bands in order to ensure the tightest seal possible. It is
recommended that you insert enough ller staves so that some of the staves between the 10 – 2 position actually “lift o” the front and rear end
panels. In other words, the radius of that the staves create will actually be slightly larger than the radius of the barrel end panels (38). This will
ensure the tightest seal possible when the bands are tightened.
BARREL SAUNA INSTALLATION MANUAL
page 5
Image 32
Image 33 Image 34
Image 35 Image 36 Image 37 Image 38
Staves slightly
lift o the ends
of the barrel