Installation Guide

Read this entire manual through to the end before proceeding with the assembly.
WOOD BURNING HEATER INSTALLATION MANUAL
page 1
®
The following instructions explain how to install a wood-burning heater in a barrel sauna. The
instructions apply to various barrel sauna diameters and sizes, and while some of the images may not
appear to exactly match your own sauna, the process is the same.
At least a day prior to installing your heater you should burn wood in the heater prior to installation.
Do not use the chimney but simply keep the stove away from ammable material and let it get hot to
burn o some of the residue within the stove.
Installation of a wood-burning heater kit will involve measuring, cutting and tting of certain
components. The installer should be qualied in these areas to properly install the heater.
The heater kit is manufactured for a global market and, as such, not all components will necessarily
be used for your installation. Use the components referenced in this instruction sheet only.
Tools needed:
Tape measure
String
Pencil
Jig saw
Drill with ½” bit
Level
Cordless driver with torque bit and Phillips bit