Owner Manual

STEP 31 - Install the hinges
onto the glass door and secure to
the window. The hinge consists
of the hinge bracket, hole spacers,
bracket cleat and hex screws. Be
sure the screws are snug before
mounting the door. NOTE: There
is an intentional gap between the
bottom of the door and the oor as
well as between the glass panels.
A sauna must have airow, which
is why these gaps are intentional. If you wish to
reduce some airow you can use the optional
clear sealing strip between the door and the
window, although in most cases this is not used.
STEP 32 - Find the door handle and install
with the wood portion on the inside of the
sauna.
STEP 33 - On the header above the door,
peel back some of the sealing strip and nd
the pre-drilled hole for the magnet. Find the
magnet in the hardware kit and squeeze it into
the hole using pliers. The magnet is adjustable
and can be loosened or tightened as needed.
Cut the sealing strip to allow for the magnet
and then reinsert the sealing strip in the
groove.