Smart Helmet ALM-H01 (Front and Back Audio and Video Recording and AI Voice Operation Mobile Phone Interactive Function Safety Helmet) Dear Customer Please read the instructions and precautions of ALM-H01 carefully before using the product.
Ⅰ.Check Packing Contents Packing list ALM-H01 helmet 1 Instructions / Warranty card / Certificate of quality 1 Note: The charger of helmet is optional, not standard accessory. Ⅱ.
service life. 3. It is forbidden to replace or remove any original accessories of the helmet; 4. It is forbidden to continue to use helmets that have had accidents or suffered large impacts; 5. It is forbidden to wear the helmet during engineering operations; The helmet belongs to the use of riding helmet; It meets the quality standard of riding helmet, but it is not suitable for special operations such as engineering operations. Wear it correctly before riding.
accessories. Please gently wipe the lens with a lens cloth to avoid wiping the image quality and clarity of the lens. The lining is pasted by hook and loop and can be taken down and washed. 16. Product storage: Helmets need to be stored in a dry indoor environment; If the helmet is not used for a long time, it needs to be fully charged and turned off. It is recommended to charge periodically once a month and be fully charged. Ⅴ.How to wear VI. Operation Method of Image Recorder and Mobile APP 1.
4. Turn on the mobile phone positioning (some mobile phones cannot connect without turning on the positioning WiFi), click the smart helmet APP , enter the APP main interface 5. Click "Please connect the device WIFI" in this interface, turn on the WLAN on the mobile phone or tablet, find the name "WiFi_ZNTK_001_****** (random code)" corresponding to the helmet WiFi, and enter the password "12345678". 6.
2.
(1) Emptying unnecessary programs that are still running in the background will make the mobile phone run faster. (2) Under the condition of complex electromagnetic environment, WiFi transmission function of helmet recorder will also be affected. 4. The record shows that the time is not synchronized: just connect helmet equipment frequently through APP. 5.
Information This logo is applicable for the electronic products sold in China; according to the Management Rules for Contamination Caused by Electronic Products and the Identification Requirements for Contamination Caused by Electronic Products (SJ/T11364), this logo indicates that the product is recyclable after its usage is over. The number in the logo indicates the environmental protection service life of the product.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
