Technical data

9 / 18
Control System
The Penta Chutian HypeCut System is complete with is front-end software: Z32 Control System. This software has
been developed within the Windows XP Professional It eliminates the possibility of memory
overrun.
Specifications and Features:
• Color TFT monitor 17"
• Hard Disk capacity 20GB for NC programs
• Floppy disk drive and USB 2.0 port (for easy ISO file load)
• Ethernet TCP/IP and optional WiFi network connection
• Fast and Easy Smart Menager program to work easly and safely with the machine
• Automatic Z-axis capilbration procedure
• User friendly interface to control the system with text error messaging
• Programmable Cutting Gas Pressure
• Piercing Control System
• Direct Laser Control System handling power modulation and pulsing features
The critical motion system remains housed in a PC based real time machine control, so that the expected
performance and reliability is maintained. The merging of the control and the Windows ™ based PC is invisible to the
operator.
The control easily facilitates graphic, conversational and conventional ISO formats for manual data input
programming. The built in cutting database assists inexperienced operators to choose optimal cutting parameters
including advance head set table to cut small hole on thick material (about half of the material thickness).
The system can also communicate with an off-line computer via Ethernet connection (cable and 2nd LAN board
supplied by Penta Chutian-ElEn).
Operator console unit