Technical data

7 / 18
Standard Cutting Head
Wuhan Penta-Chutian employs auto-focus cutting head developed by the parent company- EL.EN to the newly-released
HYPE-CUT CNC Laser Cutting Machine. Auto-focus saves a lot of time and enormously improves the efficiency of
production and quality of piercing. With piercing sensor supervising the piercing process of the medium sheets, it can raise
the rate of finished product; reduce loss caused by poor cutting and at the time increase cutting speed. In addition, the
cutting head is equipped with non-contact capacitive sensor, reflection-proof device and collision protection function and
the cutting head and focus lens can withstand the pressure of 27.5 bar of gas.
Making use of auto-focus cutting head on HYPE-CUT Series Laser Cutting Machine make Penta-Chutian again the
pacemaker of both domestically and internationally integrated laser cutting machine and have better price quality ratio.
Quick and convenient lens-changing: HYPE-CUT CNC Laser Cutting Machine provides the users with both 5.0 inch and 7.5
inch lens so that the user can apply different lens according to different thickness.
Stable Z axis floating function: With sensitive non-contact level sensor and control under the system, stable Z axis floating
function is available, which can deal with the effect caused by uneven sheets, making HYPE-CUT CNC Laser Cutting
Machine achieve much higher rate of finished product than the other domestic laser cutting machine; There is no need of
oil blast before cutting, so it takes the user less work and installation cost of assisting tools.
Collision-proof and returning when running into breakpoint: Cutting head adopts flexible design, competent of
collision-proof and automatic reset, which automatically stops cutting and flexibly diverges and resets when accidental
collision occurs, and moreover pick up from the former point, making the whole cutting process free from effect.
Auto focus and fast piercing: With auto focus and fast
piercing functions of the cutting head, user can adjust and
change different materials and thickness, greatly improving
working efficiency. For example, 16mm-carbon steel under
non-blasting piercing can be finished within 4 seconds.