Technical data

6 / 18

Laser

The new generation laser resonators with power of 2.2kw encompasses decades of experience in the field of high power

laser sources. The beam focus tolerance to center is maintained within 5.0% of the nozzle orifice diameter. Beam

perpendicularity is maintained to within 2 milli-radians and centered to the cutting lens within 2.5mm radius.

The great thermo-mechanical stability of the laser resonator permits its use in the most extreme industrial conditions. The

innovative double Kinematic support system guarantees total disjunction between the laser performances and the

mechanical and thermo-mechanical movements of the chassis. This patented solution gives to the resonator an

exceptional stability and repeatability in both the long and short term.

Equipped with fast flow axial CO2 laser source, HYPE-CUT CNC Laser Cutting Machine distinguishes itself from that of slab

laser source of the same power with much higher photoelectric transformation efficiency, less give-off of heat and thus

need of low power water-cooling unit.

Due to the adoption of electromagnetic oil-free centrifugal turbine to laser source of EL.EN,HYPE-CUT can realize

maintenance-free for 40,000 hours; the laser source utilizes modular laser power technology, which is of good directivity

and no reshaping, so the use of optic devices is low and maintenance is as simple as of low cost.

El.En Compact Laser series

high power CO

Laser

Wavelength 10.6μm

Laser Power 2200W

Power Stability 3%

Gas Mix composition CO

He (4:26:70)

Gas mix Consumption 25 Normal liter / hour (Normal liter: 1 liter at atmosphere pressure)

The new C2200 DC lasers uses 30% less power than other RF laser sources, which complements the machine’s operating

costs