Technical data

11 / 18
Automatic dross cleaner: the cutting table is divided into three areas, all the cutting dross will be collected through a
drawer from each area, and then goes to a bulk under the table through a moving chain.
Fume extraction: the pulse and filtered type of suction system will take off the wasted cutting assisting gas and
smoke produced during the cut from the table, filtered and then released to the environments.
Cooling water is maintained at ideal operating temperature via a chiller that assures correct cooling of the internal
laser system. The chiller is equipped with dual line water services. The first is targeting the Laser. The second one is
used for the external optics and cutting head lens: this feature eliminates the risk of condensation.
Work Support
The work piece is supported by a grid assembled from replaceable components. The system itself may be used to
manufacture additional replacement grid, using programs provided by Penta Chutian. The grid work is adaptable,
and spacing and support material type may be varied to suit the application.
Optional manual clamps for clamping sheets are provided for ultimate cutting accuracy upon requesting
The HypeCut footprint
1
including the Pallet Changer
The Pallet Server
The load-unloading system with pallet exchanger (dual pallet shuttle) is designed to quickly handle up to a 1800 Lbs
(800Kg) sheet per pallet. Both pallet shuttles can have 7 clamps for securing thin sheet.
1
Layout may vary as client’s space availability