Technical data

10 / 18
Operating Software
Smart Manager is software imported from Italy, commonly used in Europe, and developed within the Windows XP
Professional environment. It can be fully connected with CNC system, so the control and update of the software of
the machine tool and laser source would be easier and faster. Main features of Smart Manager are as below:
 User friendly interface facilitates learning and operating. The computerized numerical control, NC program is of
good readability.
 Equipped with cutting database, the cutting parameters can be timely adjusted in the course to achieve best
quality.
 Various drilling modes are optimized, like continuous drilling, pulse drilling, blasting piercing and so on.
 Many moving modes are optimized, having leapfrog function and automatic turnoff of the assisting gas when
fast moving.
 Easier and faster automatic edge-finding function
 Cutting head automatic calibration function and the response time of Z axis is intensively increase
Table
The base is constructed using sturdy stress relieved steel fabrication with way surfaces ground for the mounting of
the high precision rack guides.
The gantry structure is designed from Aluminum and is extremely rigid; yet, lightweight to achieve and maintain
high acceleration.
The work area is 4000mm in the X axis direction and 2000 mm in the Y axis. The pallet is 4000 by 2000, allowing the
position of the clamps outside the working area.