System information

System Administration Guide
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems.
Revised: March 28, 2007
Page 43
interface that is operating as the FXS side of the Ground-Start interface. This mode is NOT
symmetrical.
 56K Data Channel
– Specifies that 56Kbits/sec of bandwidth is provided by this slot for the Digital
Line’s logical data connection. This mode is typically only used if 64K clear channel service is not
available. This is the only mode that should be used for data connections when AMI Line Code mode is
selected.
 64K Data Channel
– Specifies that 64Kbits/sec of bandwidth is provided by this slot for the Digital
Line’s logical data connection. This is used when clear channel data service is available. This mode
must not be selected if the Digital Line’s AMI Line Code mode is selected.