System information

System Administration Guide
When you click the Save button, a pop-up window prompts you to enter the description for the new
configuration. After clicking OK in the pop-up window, the template is saved and will now appear in the list of
Handset Configuration Templates.
9.7.4 Applying a Template to a Phone’s Configuration
To apply a template to a phone’s configuration, follow these steps:
1. Click View Configuration on the phone to be changed.
2. Using the Template Options section, select the template to be applied from the drop down list.
3. Click the Apply button.
9.7.5 Deleting a New Template
The factory provided templates cannot be deleted. To delete an administrator created template, click its
Delete link in the Handset Configuration Templates section of the Phone System / Handsets page.
9.7.6 Changing a Template’s Configuration
Templates can be saved, applied, and deleted. To change a template’s configuration, a combination of those
operations must be used. The template configuration cannot be edited directly. The required steps to
change a template are to: delete the template you want to change, edit a phone’s configuration that reflects
the template you want to change, and then save the template with the original name.
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems.
Revised: March 28, 2007
Page 37