System information

System Administration Guide

Enable Auto Retrieve Calls – When the phone is on the hook and a call is on hold, then when the phone is

taken off hook, the call on hold is automatically retrieved. When this is not enabled, the phone gets an open

line (if available) when taken off hook.

Enable Call Timer Display

– When disabled prevents the phone from displaying any call duration timers.

Enable Caller ID Display

– When disabled prevents the phone from displaying any caller ID information

during calls.

Enable Configuration Menu

– When disabled, this prevents the phone station operator from accessing the

station configuration menu. This is useful for securing phones located in common areas.

Enable DTMF Playout

– When disabled, DTMF digits are not allowed to be sent during an active call.

Enable Intercom Auto Answer

– When disabled, incoming intercom calls must be manually answered like a

regular phone call. Otherwise, intercom calls automatically answer with a live microphone after the alerting

tone.

Enable Keypad Dialing – If not enabled, the keypad cannot be used to initiate or transfer a call. This does not

prevent the keypad from functioning during an active call. It prevents the use of the keypad to initiate any

functions directly with the Allworx

server (for example: dial number, Call Park, etc.).

Enable Line Appearance(s) Use of Dial Plan

– If not enabled, the phone number dialed when a Line

Appearance PFK is selected is not displayed by the phone, is not recorded in the phone’s call history, and is

not available for redial. A reason for disabling this is if the CO lines on the system do not follow the North

American Numbering Plan (including if the lines connects to another PBX). The use of this feature requires

the server’s dial plan to be configured (see Dialing Rules and Service Groups).

Enable Off Hook Ringing

– Normally the phone audibly rings anytime there is an active incoming call.

However, when this checkbox is disabled, the phone station will not audibly ring if you are already in an

active call. The appearance LED indicators and the display operation are not affected.

Enable On Hook Dialing – On hook dialing means that the handset doesn’t have to be picked up (nor the

speakerphone button hit) before dialing a number on the keypad. When the phone is on hook and a digit is

dialed on the keypad, the phone will automatically go into speakerphone mode.

Enable Visual Ringing – When checked the visual indicator on the phone lights anytime the phone has an

incoming call. When disabled, only audible ringing is heard assuming that is enabled.

9.7 Configuration Templates

Configuring many phones can be time consuming and error prone. To improve this, the Allworx

server

provides templates that store a phone configuration. The system provides a factory default template for each

phone type. However, the System Administrator can create his/her own unique templates as well.

A list of all the templates known by the system is in the Handset Configuration Templates section of the

Phone System / Handsets page.

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com

Revised: March 28, 2007

Page 35