System information

System Administration Guide

Select the phone model and fill in the required fields.

6.1.2.1 Plug-and-Play Phones

If the phone is one of the supported plug-and-play types, then follow these steps:

1. Change the Model to the appropriate selection for the phone that is to be configured.

2. Enter a Login ID and Password for the phone to use to authenticate with the server.

Note: The Login ID must be unique; cannot use the same Login ID on multiple phones.

3. Enter the correct MAC Address for the phone.

Note: If this is not correct, then when the phone is booted on the network, the server will have a duplicate

entry for this phone because it will plug-and-play register itself with the system using the correct

MAC address.

4. Enter the other parameters as necessary.

5. Click the Add button to add the new handset to server.

6.1.2.2 Other/Generic Phones

If the phone is not an Allworx

IP phone or one of the recognized Cisco phone types, then follow these steps:

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com

Revised: March 28, 2007

Page 18