System information

System Administration Guide
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems.
Revised: March 28, 2007
Page 100
23.2 Paging Zone Names
The name assigned to each of the paging zones (0 - 9 and corresponding extensions 460 - 469) can be
modified to provide a meaningful descriptive name. To change the names of the zone navigate, to the Phone
System / Paging and select Modify in the Paging Zone Names section of the page.
If you change the names of any Paging Zones, any handsets with a PFK defined for those Paging Zones will
not use the new name until the handset has been rebooted.
23.3 Paging Zone Operation on the Handsets
Each applicable lineout and Allworx handset can be added to or removed from each of the paging zones. By
default, each applicable lineout and handset are enable for paging zone 0 and disabled for all others. The
paging zones can also be enabled and disabled on the handset configuration page. The handsets can be
configured to one of the following relative to all pages received:
 Pages always accepted.
 Pages accepted only while on hook.
 Pages never accepted.
If you change the zones for a handset, it is necessary to reboot the handset for the changes to take effect.