Installation guide
48x Server Installation Guide
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2010 Allworx Corp. All rights reserved. Allworx is a registered trademark of Allworx Corp. All other names may be trademarks or registered
trademarks of their respective owners.
Version: 1. Revised: July 15, 2010
Page 11
6 Server Configuration
The Allworx 48x provides an administrative interface to configure and administer the server. The administrative
interface is accessed using a web browser. Assuming the network settings are set to their factory defaults, the
steps to connect to this interface are:
1. Plug your PC into the server’s LAN port.
2. Set up the PC’s network interface to obtain an IP address automatically (using DHCP).
3. Verify that the PC has an IP address on the 192.168.2.x network. You may need to release and renew the
PC’s IP address to get an address from the server.
4. Open your browser and enter the URL of http://192.168.2.254:8080.
5. When the “Welcome to Allworx” page appears, login using the default password: admin.
When the Home page appears, click on the Install Checklist link (on the left hand side) to bring up a new
window containing steps necessary to set up a new system. Each brief step description is followed by a link to
get to the appropriate administrative web page to execute the step. These steps are ordered to aid in a
successful configuration. Most of the web pages used to execute each step contain detailed feature
descriptions and help instructions that are required to carry out the step. Use the Allworx System
Administrator’s Guide
**
as a supplement for the information on the web pages when necessary.
If the server has been previously configured for another installation, you should restore it to its factory default
configuration. This can be done by:
1. Rebooting the server to Safe Mode by holding down the power button when the server is off, or selecting
Maintenance / Restart, and Enter Safe Mode after restart.
2. Format the disk and perform a Software Update (See Allworx System Administrator’s Guide
** for
instructions).
**
Allworx System Administrator’s Guide for the can be found at www.allworx.com